Back to TCC Competition Primers


TCC NAR Competition Primer: USMRSC Rule 37:  Rocket Glider Duration Competition (RG)


 After you review this primer, please support the TCC Competition Primer Project by completing this short survey. Thanks.


This primer presents, in one place, all the information you need to succeed in NAR model rocket competition in this event.

TCC has provided a link to the official rules whenever we discuss a rule.


All Entries

Your entry must:

* Comply with the NAR Model Rocket Safety Code: USMRSC 2.2

* Be a model rocket as described by the United States Model Rocket Sporting Code. USMRSC 3.1-3.9

* Use NAR Contest Approved motors: USMRSC 4.1, 4.4

* NOT eject its motor casing(s) without a recovery system. USMRSC 9.2

* Have your NAR number or your name on the outside, large and clear enough that the contest officials can easily read it. Teams must use the Team number or name. USMRSC 9.4

* Have been constructed by yourself or by one or more members of your Team. You may not enter Ready-To-Fly rockets (no construction required) in NAR sanctioned competition. USMRSC 9.9


Know the rules

Your having a grasp of the bigger picture can increase your enjoyment of NAR competition. You can read the Pink Book Lite to see only the rules for competitors, not for Contest Directors or other contest officials. Read the full USMRSC (Pink Book) to see all the rules.

* Pink Book Lite:

* Full USMRSC:


General Competition Tips:

TCC NAR Competition 101

TCC NAR Competition Strategy and Tactics

Contest Etiquette by Kevin Paul Wickart, NAR 59720, cr 1998, the author

Beginning Competition -- The RSVP Principle by Kevin Paul Wickart, NAR 59720, cr 1998, the author

Guide to NAR Contest Rocketry Information for Beginners by Jeff Vincent, NAR 27910, Northeast Regional Contest Chair


Which are the Main USMRSC Rules for This Event?

* The main rules are 9, 15 and 37.

* This event can be flown as Multi-Round.


What is the Goal?

* In Rocket Glider Duration Competition you want to achieve the longest possible flight duration for a model rocket that returns to the ground in stable, gliding flight without separating into two or more pieces. USMRSC 37.1


Are There Any Special Considerations?

* The gliding surfaces (wings) must be made of rigid materials. The wings can move and/or flex. The wings can consist of many pieces as long as each piece is rigid. USMRSC 37.1

* Your entry must be single-stage. USMRSC 37.1

* Your entry may NOT separate into multiple parts. USMRSC 15.2

* If your entry is clustered, enough motors must ignite for it to meet the impulse class requirements or the flight will not be official. USMRSC 10.3

* RG is divided into classes based on the allowed total impulse of the motor(s). USMRSC 37.3

* This event can be flown as Multi-Round.


Do I Have to Return My Entry?

* You must return your entry after at least one qualified flight in order to place in 1st-4th. USMRSC 15.10, 13.1

* If you cannot return your entry after at least one qualified flight, you’ll only get Flight Points. USMRSC 13.1, 13.4, 13.5

* The Contest Director can require that you return your entry. USMRSC 9.10


How Many Flights Can I Make?

* You can make up to two flights. USMRSC 10.1

* You can use more than one model. USMRSC 9.7


How is the Competition Scored?

* Your official score is the sum of the durations achieved by your entry on up to two official flights. USMRSC 10.1, 10.3

* The duration starts at the first motion on the launch pad and ends when the gliding portion lands or the timer loses sight it. USMRSC 15.6


What Will Disqualify My Entry?

* Your entry will be disqualified if the gliding portion has a permanently attached streamer or parachute. USMRSC 37.2

* Your entry will be disqualified if, in the opinion of the contest officials, it is not reasonably safe in operation or the glider fails to glide. USMRSC 11.1


How About Some Suggestions for New Competitors?

Rocket Glider Duration is different from Boost Glider Duration in that your entry CANNOT eject the motor or separate into pieces. You probably won’t find a rocket glider kit at the local hobby store. Build a rocket glider from a kit by Qualified Competition Rockets (see the TCC Competition Vendor List below) or from a plan for a successful rocket glider (see Online Competition Rocket Plans below). For more details, see George Gassaway’s NARAM Tips below.


Here’s a link to Apogee Components “Peak of Flight” newsletter articles on glider trimming.


TCC Competition Vendor list:


What Else & What Next?

Online Competition Rocket Plans:

NAR Competition Plans:


More details on trimming from Kevin McKiou (Vector-Aero Cuda)


Use a tower or piston launcher to eliminate the launch lug and its drag. Piston Launchers Explained


A simple tower can also be effective:  Bob Supak, NAR 65523

  - Take 3 1/4" aluminum rods, each about 24" long.

  - Depending on what size model you want to launch, take an 18" piece of same body tube and put a few wraps of tape at each end.

  - Place the 3 rods in a triangle around the body tube and secure with rubber bands, leaving 6" of the ends of the rods exposed.

  - Now place the rods into a coffee can full of wet cement or plaster and let set. Voila - launch tower!


Use computer simulations to determine altitude various rocket and motor combinations. This is a bit more difficult for gliders as you must compensate for the extra drag of the gliding portion.

Free altitude simulations:  wRASP - and wRASP 32 -


TCC NAR Competition Bibliography


Yahoo group for discussing model rocket competition in general:


Yahoo group for discussing this event:


George Gassaway’s NARAM Tips:


Detecting Thermals:


US Spacemodeling (International Competition Tips):


US Spacemodeling Home Page (International Competition):


rmr Frequently Asked Questions – Part 9: Competition and Records:



Back to TCC Competition Primers